BLACK FRIDAYJahrestiefstpreise
HOHE RABATTGUTSCHEINENur für kurze Zeit
00Tage11Std05Min50Sek
Jetzt kaufen
LiThink

Black-Friday-Angebot

Zusätzlich sichern
6 % Rabatt

Dein Black-Friday-Vorteil

03Stunden 00Minuten 00Sekunden

Sichere dir deinen Black-Friday-Rabatt.
Abonnieren und 6 %-Rabattcode freischalten.

Which Battery for a Trolling Motor? The Complete Selection Guide

For anglers who enjoy fishing on lakes and rivers or from small fishing boats, a trolling motor has become essential equipment.

When choosing a suitable trolling motor, however, many users face a crucial question:

The most important question: What battery does a 55lb, 70lb or 80lb trolling motor need?

Many users initially assume that the largest possible battery capacity is automatically the best solution. In practice, however, the choice is much more complex.

The right trolling motor battery depends not only on Ah capacity, but on several factors:

Key factors to consider:

  • Trolling motor thrust
  • System operating voltage
  • Boat weight
  • Desired runtime
  • Water conditions and environment
  • Battery continuous discharge capability

If the battery is incorrectly sized, even a powerful trolling motor cannot perform at its full potential. Common problems include short runtime, declining performance or insufficient power for a full day of fishing.

Before choosing a battery, it is therefore important to understand how thrust, voltage and capacity relate to one another.

1. What do 55lb, 70lb and 80lb mean for trolling motors?

1.1 lb refers to thrust, not battery capacity

The "lb" rating of a trolling motor describes its thrust (pounds of thrust). It indicates how much propulsion the motor can generate.

Trolling motor Meaning
55lb Approximately 55 pounds of maximum thrust
70lb Approximately 70 pounds of maximum thrust
80lb Approximately 80 pounds of maximum thrust

Higher thrust means the motor can move larger boats and provide better control in challenging water conditions.

Important: Higher thrust does not automatically mean a proportionally higher energy consumption.

Actual power consumption is affected by many factors:

Factor Effect on energy consumption
Boat weight Heavier boats require more thrust
Speed Higher speeds significantly increase power consumption
Wind and current Headwinds or opposing currents increase the load
Load More people and equipment reduce runtime
Usage patterns Frequent acceleration and changes of direction consume more energy

A battery should therefore never be chosen solely on the basis of the motor's lb rating.

2. Why do trolling motors use 12V, 24V and 36V systems?

When buying a trolling motor for the first time, many users wonder why some models use a 12V system while others require 24V or even 36V.

The reason lies in the power required. More powerful trolling motors need more energy. A higher system voltage reduces the current required.

Basic formula:

Power (W) = Voltage (V) × Current (A)

When a trolling motor needs to deliver the same power, a higher-voltage system has clear advantages:

Higher voltage: Less current required for the same power

Lower current: Fewer cable losses and less heat

More efficient system: Better use of available energy

Example:

System Calculation Current required
12V system 1200W ÷ 12V 100A
24V system 1200W ÷ 24V 50A

For the same power requirement, a 24V system therefore needs approximately half the current of a comparable 12V system.

System voltage Features Typical application
12V Simple installation, suitable for smaller systems Small boats, kayaks
24V Higher efficiency, suitable for more powerful motors Medium-sized fishing boats
36V Very high power for demanding applications Large boats and high-performance trolling motors

3. Which battery for a 55lb trolling motor?

A 55lb trolling motor is generally considered a medium-thrust motor and is one of the most popular choices for recreational anglers.

Typical applications include:

  • Kayaks
  • Small aluminium boats
  • Small fibreglass fishing boats
  • Lightweight fishing boats

As these boats are usually lighter and require less thrust, many 55lb trolling motors use a 12V system.

The right battery capacity, however, depends mainly on the desired runtime.

Battery capacity Suitable use
12V 100Ah Short fishing trips with few position changes
12V 120Ah–150Ah Half-day or full-day fishing trips
12V 165Ah or larger Long trips with higher energy demands

For occasional weekend trips on calm lakes, travelling slowly and changing position infrequently, a battery of around 100Ah may be sufficient.

However, anyone who frequently:

  • changes fishing spots
  • uses the trolling motor for extended periods
  • travels at higher speeds
  • carries a lot of equipment

will benefit significantly from a larger battery capacity.

Important: A larger battery capacity does not increase motor thrust. It simply provides longer runtime and reduces how often the battery needs recharging.

4. Which battery for a 70lb trolling motor?

A 70lb trolling motor provides more thrust than a 55lb model and is often used for larger boats or more demanding conditions.

Typical applications:

  • Larger fishing boats
  • Two-person boats
  • Boats with additional equipment

As boat weight increases, more propulsion is needed. If a 12V system were still used, the motor would need to draw considerably more current for the same power.

High current can cause the following disadvantages:

  • Higher cable temperatures
  • More energy lost in the wiring
  • Lower system efficiency

Many 70lb trolling motors therefore run on a 24V system.

Typical battery options for 70lb trolling motors

Option 1: Two 12V batteries in series

12V battery + 12V battery = 24V system

This solution is flexible and easy to expand.

Benefits:

  • Readily available
  • Individual batteries are easier to replace
  • Capacity can be expanded flexibly

Option 2: A single 24V battery

This solution reduces wiring and keeps the system tidy.

Benefits:

  • Fewer cable connections
  • Easier installation
  • Better suited to permanent installations

For a 70lb trolling motor, a battery capacity of at least 100Ah is generally worth considering.

However, anyone who:

  • wants to fish for a full day without recharging
  • frequently travels long distances
  • wants to recharge less often

should choose a larger capacity.

5. Which battery for an 80lb trolling motor?

An 80lb trolling motor is a high-powered motor used mainly for larger fishing boats, more challenging waters or longer journeys.

Typical applications:

  • Larger fishing boats
  • Waters with stronger winds or currents
  • Longer journeys between fishing spots
  • Heavier boats with additional equipment

Compared with 55lb and 70lb models, an 80lb trolling motor needs not only a larger battery capacity, but above all a stable power supply.

During use, the following situations can briefly increase the load on the motor significantly:

  • Travelling at high speed
  • Headwinds or opposing currents
  • Rapid acceleration
  • Frequent changes of direction

If the battery cannot deliver enough current, the following problems may occur:

  • Reduced motor power
  • Rapid voltage drop
  • BMS protection triggering

The following systems are therefore often used for 80lb trolling motors:

System Suitable application
24V system Standard solution for many powerful trolling motors
36V system Maximum power and longer runtime for demanding applications

For battery capacity, you should generally consider at least 150Ah and choose the size according to the actual runtime required.

Important: For powerful trolling motors, capacity is not the only factor. A battery must also have sufficient continuous discharge capability and a reliable BMS.

6. How do you calculate the required Ah capacity for a trolling motor?

The unit Ah (amp-hours) describes the amount of energy stored in a battery.

In simple terms:

Example: A 100Ah battery can theoretically deliver 1A for 100 hours or 10A for 10 hours.

The basic formula is:

Calculation: Battery capacity (Ah) ≈ Operating current (A) × Runtime (h)

Example:

If a trolling motor draws an average of 20A and a runtime of 5 hours is required:

20A × 5 hours = 100Ah

In theory, a 100Ah battery would therefore be sufficient.

In practice, however, this calculation should not be treated as an exact figure, as real-world conditions involve additional factors:

Factor Effect
Motor efficiency Some energy is consumed in operating the system
Battery efficiency Not all stored energy is available under all conditions
Water resistance Wind, currents and waves increase the load
Usage patterns Higher speeds and frequent changes increase consumption

It is therefore advisable to allow a safety margin when choosing a battery rather than relying solely on the calculated theoretical minimum.

7. Why does actual runtime differ from the theoretical calculation?

Many users find themselves asking after purchase:

"Why doesn't my battery achieve the manufacturer's stated runtime in practice?"

The main reason is that manufacturers' figures are normally obtained under controlled test conditions.

Typical test conditions:

  • Calm water
  • Standardised boat weight
  • Constant speed

Actual fishing conditions, however, are much more variable.

Effect of wind and current

In a headwind or opposing current, the trolling motor must work harder to maintain the same speed. This significantly increases power consumption.

Effect of boat weight

A heavier boat means:

  • More water resistance
  • Higher motor load
  • Shorter runtime

Effect of usage

Speed has a major effect on energy consumption:

Slow travel: Low energy consumption and longer runtime.

High speed: Significantly higher current demand.

Frequent position corrections: Additional energy consumption from acceleration and changes of direction.

Especially when spin fishing or holding a specific position, the motor is frequently adjusted and does not operate under the same conditions throughout.

A battery should therefore not be chosen to match the theoretical minimum requirement exactly. An adequate capacity reserve provides more reliable use throughout the fishing day.

8. Why LiFePO4 batteries are becoming increasingly popular for trolling motors

Traditionally, lead-acid batteries were used mainly for boats and trolling motors. As modern fishing technology develops, however, more and more users are choosing LiFePO4 lithium batteries.

The reason is the significant advantages of this technology, especially for mobile applications such as kayaks, fishing boats and small fishing vessels.

8.1 Higher usable capacity

Even if two batteries have the same Ah capacity on their specification sheets, the amount of energy actually available can differ.

Lead-acid batteries should generally not be deeply discharged, as doing so can significantly shorten their lifespan.

LiFePO4 batteries on the other hand, can safely use a much larger proportion of their stored energy. This means more usable capacity is available in practice, potentially resulting in longer actual runtime.

Practical benefits:

More usable energy: A larger proportion of the stored capacity can be used.

Longer runtime: Fewer interruptions while fishing.

Better energy utilisation: Ideal for long sessions on the water.

8.2 Lower weight

Every additional kilogram matters on a boat. Weight affects:

  • The boat's balance
  • Transport and handling
  • Energy consumption while travelling

Compared with conventional lead-acid batteries, LiFePO4 batteries are significantly lighter and therefore particularly suitable for:

  • Kayaks
  • Small fishing boats
  • Applications where the battery is frequently moved by hand

8.3 More stable high-current power supply

When starting, accelerating and changing direction, a trolling motor needs a stable power supply for short periods.

High-quality LiFePO4 batteries with an intelligent BMS can monitor important parameters and protect the system.

Key protection features:

  • Overcurrent protection
  • Short-circuit protection
  • Temperature protection
  • Overvoltage and undervoltage protection

This helps the trolling motor operate more reliably and steadily even under changing loads.

9. What factors are important when choosing a trolling motor battery?

In addition to battery capacity, other technical features play an important role in the selection.

Parameter Meaning
Continuous discharge current Determines whether the battery can supply the motor with sufficient current over time
Peak discharge current Affects performance during startup and short-term loads
BMS protection system Protects the battery against overcurrent, overheating and other risks
IP protection rating Important for wet environments and use on boats
Low-temperature protection Enables safe operation in cold conditions

Especially in marine use, a battery must not only supply power but also withstand various external conditions:

  • Moisture
  • Salt water and salt spray
  • Vibrations
  • Temperature fluctuations

A boat battery should therefore not be chosen based on capacity alone. Overall system reliability is essential.

Summary

A suitable trolling motor battery can be selected using the following basic guidelines:

Use Recommended solution
Small kayak, small boat, short fishing trip 12V 100Ah LiFePO4 battery
55lb trolling motor, all-day fishing 12V 150Ah–165Ah LiFePO4 battery
70lb trolling motor 24V system with at least 100Ah capacity
80lb high-performance trolling motor 24V/36V system with larger capacity

The most important rule: Battery capacity determines runtime, voltage determines system efficiency, and discharge capability determines whether the trolling motor can deliver consistent power.

A properly matched battery not only provides longer runtimes but also delivers reliable performance in different water conditions.

With the right combination of voltage, capacity and discharge capability, every trip becomes more efficient, comfortable and safe.