BLACK FRIDAYJahrestiefstpreise
HOHE RABATTGUTSCHEINENur für kurze Zeit
00Tage10Std07Min50Sek
Jetzt kaufen
LiThink

Black-Friday-Angebot

Zusätzlich sichern
6 % Rabatt

Dein Black-Friday-Vorteil

03Stunden 00Minuten 00Sekunden

Sichere dir deinen Black-Friday-Rabatt.
Abonnieren und 6 %-Rabattcode freischalten.

IEC 62619 & UN 38.3: The Importance of Battery Safety Standards

IEC 62619 & UN 38.3: Die Bedeutung der Batterie-Sicherheitsnormen

In an era of energy storage dominated by lithium-ion technology, safety is the foundation of the industry. Two key standards - IEC 62619 and UN 38.3 - provide the essential framework for assessing and managing battery risks. Although they are often mentioned together, their objectives, scope and technical content differ fundamentally. A thorough understanding of these standards is essential for battery manufacturers, system integrators, supply chain managers and end users alike.

1. Global Guidelines for Battery Safety

Lithium batteries are a key component of modern energy storage and power systems in the energy transition. Safety is not just a buzzword, but a body of international standards. Among these, IEC 62619 and UN 38.3 are particularly significant. They address safety in manufacturing and use, and in transport and distribution, respectively - together providing protection throughout the entire lifecycle.

IEC 62619: Issued by the IEC (International Electrotechnical Commission); verifies the consistency of rechargeable lithium battery design and safety.

UN 38.3: Developed by the UN Committee of Experts on the Transport of Dangerous Goods; ensures safe, stable transport worldwide.

At a glance: IEC 62619: The foundation of inherent safety. UN 38.3: The "passport" for global trade.

2. IEC 62619: The Core Standard for Battery Design Safety

IEC 62619 is the internationally recognized safety standard for industrial and energy storage lithium batteries ("Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications"). Its aim is to ensure the safe, reliable operation of larger systems throughout their service life.

Electrical safety tests: Overcharge, overdischarge, short circuit, reverse polarity and more; the battery must not catch fire, explode or leak excessively, even under extreme conditions.

Environmental resistance: High and low temperatures, humidity cycles - stability in different climates.

Mechanical safety: Vibration, shock, crushing - structural integrity must be maintained.

Thermal safety: Focuses on preventing or limiting thermal runaway, including preventing its propagation.

For Lithink, IEC 62619 is not just a regulatory hurdle but a technical benchmark in the development process: from design reviews to production sample testing, all models - regardless of capacity, form factor or intended use - are validated to IEC standards to ensure reliability over the long term.

3. UN 38.3: The Cross-Border "Transport Passport"

UN 38.3 is a mandatory testing section of the UN Manual of Tests and Criteria for the transport of dangerous goods. It focuses exclusively on safety in the logistics chain. All lithium cells and batteries that can be transported independently must pass eight key tests before shipment:

T.1 - Altitude/pressure simulation: Altitude Simulation

T.2 - Thermal cycle: Thermal Test

T.3 - Vibration: Vibration

T.4 - Mechanical shock: Shock

T.5 - External short circuit: External Short Circuit

T.6 - Crush/impact test: Impact/Crush

T.7 - Overcharge: Overcharge

T.8 - Forced discharge: Forced Discharge

These tests simulate extreme transport conditions - from changes in air pressure and temperature to vibrations and mechanical stresses. "UN 38.3 Test Passed" is therefore more than just a technical label; it is a prerequisite for transport by air, sea, road and rail.

All Lithink batteries pass the full UN 38.3 test sequence. This ensures compliance throughout every stage of logistics - from the factory and warehouse to the end customer.

4. Key Tests in IEC 62619

IEC 62619 covers electrical, thermal, mechanical and BMS protection functions and verifies stability and controllability under abnormal or extreme conditions. Overview of the main tests:

External Short Circuit: Objective: thermal safety during a short circuit. Procedure: apply a direct short circuit at 25 °C ± 5 °C with 30 mΩ ± 10 mΩ. Criterion: no fire or explosion.

Impact/Crush Test: Objective: structural safety under external stress. Procedure: axial or flat impact; observe deformation and reactive behavior. Criterion: no fire or explosion.

Drop Test: Objective: incidents during transport or installation. Procedure: free-drop the cell from 1 m; drop the system sample from 0,1 m onto an edge or corner. Criterion: no fire or explosion.

Thermal Abuse: Objective: stability under overheating. Procedure: heat to the specified temperature and hold for the specified time. Criterion: no fire or explosion.

Overcharge Test: Objective: BMS effectiveness under overvoltage. Procedure: charge above the rated voltage until the time or voltage limit is reached. Criterion: no fire or explosion; the BMS disconnects in time.

Forced Discharge: Objective: risks from unbalanced series connections. Procedure: apply reverse current (≈ 1C discharge rate) until the specified negative voltage is reached. Criterion: no fire or explosion.

Internal Short Circuit: Objective: behavior under internal cell defects. Procedure: apply pressure until a 50 mV voltage drop or a maximum force of 800 N is reached. Criterion: no fire or casing rupture.

Thermal Propagation: Objective: system response to thermal runaway in a single cell. Procedure: trigger a cell by heating or other means and observe cascading effects. Criterion: no external flame or explosion.

BMS Functional Protection: Objective: intervention during anomalies. Scope: Overvoltage, overcurrent, overtemperature protection. Criterion: protection logic functions correctly, with no dangerous reactions.

5. Practical Significance of the Standards & Comparison

Item IEC 62619 UN 38.3
Issuing body International Electrotechnical Commission (IEC) UN Committee of Experts on the Transport of Dangerous Goods (UNSCETDG)
Testing phase R&D and production phase Transport phase for finished products
Main purpose Ensure electrical and structural safety Ensure stability during transport
Typical tests Overcharge, short circuit, thermal abuse, nail penetration/crush Vibration, shock, temperature changes, altitude/pressure, overcharge
Application Energy storage, power and industrial applications International transport & customs recognition
Key objective Prevent thermal runaway & structural failure Avoid mechanical and thermal risks during transport

Greater thermal stability: Reduced risks from temperature variations.

More precise BMS protection functions: Safe, continuous power supply to connected devices.

Full compliance: Requirements for global transport and distribution are met.

Longer service life: Validated cell and structural durability throughout the product lifecycle.

IEC 62619 and UN 38.3 provide clear safety benchmarks for manufacturers while building end-user confidence in long-term reliability.

6. Conclusion

From design to delivery, from cell to system, from laboratory testing to use: IEC 62619 and UN 38.3 are a bridge of trust between manufacturers and users. This reflects the Lithink principle: safety is not an add-on, but the starting point for every product development process.