12V 100Ah Classic

World's No. 1 LiFePO₄ internal build quality

Anti-swelling | leak-proof | vibration-resistant | up to +30 % cell lifespan

  • Capacity

    Up to 2× more usable energy

  • 1/2 Weight

    Up to 50% lighter

  • 12× Energy costs

    Only $0.03/kWh over the lifetime

  • 0.03 Energy Costs

    Only 0,03 €/kWh over the lifetime

  • 450 A 1 s

    Angle grinder

  • 400 A 3 s

    Rotary hammer

  • 300 A 5 s

    Microwave

  • 200 A 10 s

    Kettle

Winter-ready for the Motorhome & Vanlife

Automatic cold protection in the BMS protects cells, the vehicle electrical system and the trolling motor in frost – for reliable 12‑V power on snowy roads and icy lakes.

  • -2 °C

    Charging Stop
  • 3 °C

    Load Release
  • −20 °C

    Unloading-Stop
  • −15 °C

    Unloading-Release

Specifications & Scope of Delivery

Included in delivery

  • Lithink 12V 100Ah Battery

  • Manual (DE/EN)

  • Bluetooth app card / warranty card (DE/EN)

  • Quick Start Guide (DE/EN)

  • 2× Lithink Stickers

  • 2× M8 screws & 2× Plus/Minus Terminal Caps

Four charging options, one battery

Whether with a charger, while driving, by solar power or a generator – your Lithink LiFePO₄ battery stays reliably charged everywhere.

Charger

Trip

Solar

Generator

Important Safety Instructions

Gloves

Wear insulated gloves

Always wear suitable protective gloves when unpacking and connecting the battery.

Full load

Fully charge before first use

The battery is delivered at approx. 60% charge – fully charge it once before use.

Insulation

Insulate bare wires before connecting

Always secure exposed terminals with suitable insulating material before connecting them to the battery.

Polarity

Connect positive and negative correctly

Before tightening the terminals, check that the positive and negative terminals are not reversed. Tighten the terminals to 12 N·m.

Charger

Use only a suitable LiFePO₄ charger

Charge 12.8 V battery at 14.6 V, 25.6 V battery at 29.2 V.

Storage

Charge to about 50% for storage

Store at 10–35 °C and recharge approximately every 3 months.

Assorted Batteries

Only connect identical Lithink batteries

Do not mix with other brands; for series/parallel connections use only identical models, purchase interval ≤ 1 month.

Load

Example title

Check device power before connection
Subtitle: Match the total power of the loads with the battery/inverter.

Cable

Select Cable by Current Rating

For higher currents, use thicker cables according to the table.

FAQs

Still have questions?
More info in our FAQs.

Q: For which applications is this battery suitable?

A: It is often used in off-grid solar systems, motorhomes, boats and general energy storage applications. It provides stable charging and discharging performance, but is not suitable as a starter battery for vehicles or high-current devices.

Q: Can multiple batteries be connected in series or parallel?

A: Yes, up to 4 in series and 4 in parallel (4S4P) are possible. Only batteries of the same model with identical voltage and capacity may be connected. Voltage equalization and appropriate cable cross-sections are required.

Q: What are the charge/discharge current and C-rate of this battery?

A: With a rated capacity of 100Ah, the standard charging current is 0.2C–0.5C (20–50A), the maximum continuous charging current is 1C (100A) and the maximum continuous discharge current is 1C (100A) – ideal for trolling motors and high-current consumers.

F: How many charge cycles does the battery have?

A: Up to 8000 charge cycles at 80 % depth of discharge (DoD).

Q: How long is the warranty period for this battery?

A: 10 years. If the battery fails within this period, LiThink will cover repair or replacement free of charge as well as all associated costs.