BLACK FRIDAYJahrestiefstpreise
HOHE RABATTGUTSCHEINENur für kurze Zeit
00Tage11Std06Min25Sek
Jetzt kaufen
LiThink

Black-Friday-Angebot

Zusätzlich sichern
6 % Rabatt

Dein Black-Friday-Vorteil

03Stunden 00Minuten 00Sekunden

Sichere dir deinen Black-Friday-Rabatt.
Abonnieren und 6 %-Rabattcode freischalten.

Monitor Lithink Bluetooth LiFePO₄ Batteries in Home Assistant – Setup with BatMON

Acknowledgements: This tutorial is based on the README documentation and project data made publicly available on GitHub by the author of the BatMON (batmon-ha) project. We extend our sincere thanks to the original developer for providing the technical content and data.

Project source (GitHub): https://github.com/fl4p/batmon-ha

This guide explains step by step how to install, configure and run BatMON in Home Assistant to read battery data directly from the battery management system (BMS) via Bluetooth Low Energy (BLE) and reliably display it in Home Assistant.

The methods described are particularly suitable for LiFePO₄ batteries with a Bluetooth BMS, such as Lithink Bluetooth batteries, and are designed for use in motorhomes, off-grid systems, and stationary energy storage systems.

Important note: BatMON uses Bluetooth Low Energy to transmit data. Depending on environmental factors (distance, metal shielding, radio interference or the host's Bluetooth hardware), brief connection interruptions may occur. These generally do not indicate a fault with the battery or BMS.

1) What is BatMON and what does it do in Home Assistant?

BatMON is an add-on developed specifically for Home Assistant to monitor battery systems. It establishes a direct connection to the battery management system (BMS) via Bluetooth Low Energy (BLE) and continuously reads operating data.

The data is sent to Home Assistant via MQTT and made available there as sensor entities. This data can be used for visualisations, logging and automations.

For Lithink LiFePO₄ batteries with a Bluetooth BMS, BatMON enables a particularly streamlined system architecture, as no additional gateways or serial interfaces are required.

  • Direct BLE connection to the battery BMS
  • Monitoring of battery voltage, current and state of charge (SoC)
  • Reading of cell voltages and temperatures (depending on the BMS)
  • Support for multiple batteries simultaneously
  • MQTT Auto-Discovery for Home Assistant
  • Integration into dashboards and energy overviews

In practice, BatMON has proven particularly effective in continuously operated systems, such as motorhomes and off-grid energy systems. For Lithink Bluetooth batteries, the data provided by the BMS is imported directly and represented as individual Home Assistant entities.

2) Requirements

  1. Home Assistant installed with Supervisor support.
  2. Bluetooth support on the host system (built-in or via a USB adapter).
  3. MQTT broker installed, e.g.  Mosquitto.
  4. Bluetooth-enabled battery, switched on and within range, e.g.  a Lithink Bluetooth LiFePO₄ battery.

Bluetooth is enabled at the factory on Lithink Bluetooth batteries. No additional activation or firmware changes are required. During setup, the battery should not remain connected to a smartphone app at the same time.

3) Step 1: Add the BatMON repository

  1. Open Home Assistant.
  2. Navigate to Supervisor → Add-on Store.
  3. Use the ⋮ → Repositories menu to add a new repository.
  4. Enter the following URL:
https://github.com/fl4p/home-assistant-addons

4) Step 2: Install the BatMON add-on

  1. In the Add-on Store, select BatMON.
  2. Click Install.
  3. Wait for the installation to complete.

5) Step 3: Install and configure an MQTT broker

  1. Install the Mosquitto MQTT add-on.
  2. Start the MQTT service.
  3. Enable the MQTT integration in Home Assistant.
  4. Configure the username and password correctly.

6) Step 4: Configure BatMON (connect a Bluetooth battery)

devices:
  - address: CC:44:8C:F7:AD:BB
    type: jk
    alias: lithink_battery
    pin: "12345"
    adapter: "hci0"
    debug: true
    current_calibration: 1.0

In multi-battery systems, multiple devices can be defined, each with its own alias. Each Lithink Bluetooth battery is then represented as a separate entity in Home Assistant.

7) Step 5: Start BatMON

  1. Start the add-on.
  2. Check the logs.
  3. Make sure the battery connection is stable and MQTT data is being sent.

8) Step 6: Display battery data in Home Assistant

Once started successfully, the sensor data is automatically integrated into Home Assistant via MQTT Discovery. The displayed values reflect the data supplied by the battery BMS and match the information in the battery app.

9) Troubleshooting

Battery not displayed or not connecting

  • Check the MAC address.
  • Configure the correct BMS type.
  • Reduce the distance between the battery and the host.
  • Review the BatMON logs.
  • Check the MQTT broker.

Connected, but no entities visible in Home Assistant

  • Is the MQTT integration active?
  • Are the MQTT credentials correct?
  • Are MQTT publish messages present in the log?
  • Reload the MQTT integration or restart Home Assistant.

Unstable Bluetooth connection

  • Avoid simultaneous connections with smartphone apps.
  • Reduce radio interference.
  • Use external USB Bluetooth adapters.
  • For stationary systems (e.g.  motorhomes or off-grid systems), a single, persistent Bluetooth connection via Home Assistant is recommended, especially for Lithink Bluetooth batteries.

10) Acknowledgements & project source

This tutorial is based entirely on the publicly available README documentation and project data of the BatMON project. We thank the original developer for providing this technical information.

Project source: https://github.com/fl4p/batmon-ha

8 comments

  • test
    • test
    • August 24, 2026 at 12:58 am

    *

  • test
    • test
    • August 24, 2026 at 12:58 am

    test

  • *
    • *
    • August 24, 2026 at 12:58 am

    test

  • test
    • test
    • August 24, 2026 at 12:58 am

    test’

  • test
    • test
    • August 24, 2026 at 12:58 am

    test

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.